ENGINEERING DIVISION

It’s kind of medium deep pattern bucket. In most cases, buckets stopped in use are caused by heavy abrasion on the bucket mouth and the tearing at the bucket mouth or the bolt fitting due to collision in the running. Our D bucket design will relieve such situation in use and extend the life span of the bucket. The unique design has made an appropriate thickness reduction on the bottom which requires a lower intensity, and the saved raw material will be used to increase the thickness of the bucket mouth and the area around bolt holes. In this way, the bucket has higher intensity and can become more wear-resistant without increasing the total weight. This design has been approved by test and widely used by leading conveying equipment manufactures.
USAGE:
1. Suitable for high speed centrifugal high-speed centrifugal discharge.
2. Recommended minimum bucket spacing: width of the bucket projection "B"+25mm, which can be appropriately reduced according to elevator capacity requirement.
3. Recommended elevator velocity 2.5m/s
4. Recommend using"Z-Y+10%" as usable capacity for engineering purpose.
Our in-depth technical knowledge and manufacturing expertise, coupled with extensive knowledge of worldwide markets puts us at the leading edge in terms of providing bespoke fastening solutions.
TYPES:
Polyethylene, Nylon or Urethane Style CC-HD, XD & U-HD:
A heavy duty agricultural bucket for handling grains, feeds, fertilizers, seeds, salt, sand, chemicals, and a variety of other free flowing materials.
Polyethylene is ideal for most applications, while nylon or urethane is recommended for highly abrasive products or extremely high throughput elevators.
Polyethylene, Nylon or Urethane Low Profile:
The same CC-HD,XD or U-HD style agricultural duty bucket as described above only modified to a “low profile” to allow closer spacing on the belt. Used to increase bucket elevator capacity over what can be achieved using conventional buckets and spacing’s.

Polyethylene, Nylon, Urethane Super Euro Bucket & Euro Bucket:
A European style agricultural duty bucket molded in a “low profile” configuration. Super Euro Buckets and Euro Buckets are a direct interchange/replacement of European pressed steel and molded non-metallic buckets.

Nylon, Polyethylene or Urethane Style AA and AC:
An industrial duty bucket for handling foundry sand, sand and gravel, coal, fertilizers, clay, salt and many other industrial materials.

Ductile Iron or Aluminum Style AA and AC:
An industrial duty bucket for handling stone, foundry sand, sand and gravel, coal, fertilizers, clay, salt and many other industrial materials. Iron is ideal for large, dense, sluggish products or sharp cutting products such as crushed glass. Aluminum is a light weight bucket for nonabrasive products in hot applications (2500F to 4000F /1210C to 2040C) where non-metallic buckets cannot be used because of the high temperature

Fabricated Steel Style CCB, Nu-Hy and Sweetheart:
Agricultural duty buckets for handling grain, feeds, fertilizers, seeds, salt, sand, chemicals, food products, and a variety of other free flowing materials. Steel is ideal for sharp cutting products such as crushed glass and hot applications (over 2750F/ 1350C) where non-metallic buckets cannot be used. Diggers used in conjunction with plastic buckets to aid in breaking up tough materials.